This page is part of my Custom Lighting Mod series of articles.
DISCLAIMER: If you choose to attempt any of these modifications, you assume all risks thereof. I just wanted to share my experiences here. Neither Agora Models, nor myself, are responsible for any damages that may occur.
Lighting Stage 39
The only thing we need to do during Stage 39 is to feed the LED wiring from the Step Backplate through the hole we drilled in the Box Frame before installing the steps:
These middle lights on the Box Frame were connected to the resistored sockets of the Micro 4-port Expansion Board for the Body Side & Rear Emergency Lights. I chose to have the strobe pattern alternate down the side of the truck, so I plug them into alternating boards as I go:
Next Custom Lighting Page
LIGHTING 40 – Adding our custom lighting to Stage 40